Install Guide
Just received your new graphics? Discover the quickest and best way to apply your Fusion Graphix kit and seat cover below! You will also find information on all our different materials.
Equipment
Before installing your product; make sure you have the necessary tools to ensure your install is stress-free!
Preparation
Using your surface cleaner, wipe the surface clean on each plastic piece that you will be installing your graphic kit.
Visualize
It's important to visualize and preplan how you want to align your graphic on the bike. Take into consideration of folds and the mold of the plastic. Once you have done so, peel and cut a partial amount of your backing on the graphic in order to align properly.
Install
Once you have tacked down the area of the graphic that is visible from peeling the backing; begin to peel back the rest of the back slowly and install your graphic. Use heat and squeegee for a stress free task.
Finalize
Once you have fully installed your graphic, utilize heat in necessary areas and corners to finalize your install.
